Dual Ferrous/Non-Ferrous Metal Coating Thickness Gauge with Integral Probe, Scale 1, Model T

Elcometer
Part No: A456CFNFTI1
$0.00
Availability:
Normally ships in 2-7 business days
Quick Overview

Range: 0-60 mils (0-1500µm)
Accuracy: ±1-3% or ±0.1 mil (±2.5µm)
Resolution: 0.01 mil: 0-5 mils; 0.1 mil: 5-60 mils
                      (0.1µm: 0-100µm; 1µm: 100-1500µm)
Display Information: 2.4" (6cm) QVGA color TFT display,
                                       320 x 240 pixels
Battery Type: 2 x AA dry cell batteries, rechargeable batteries can also be used
Battery Life: approximately 24 hours of continuous use a 1 readings per second**
Gauge Dimensions: 5.55"H x 2.87"w x 1.46"D (141 x 73 x 37mm)
Gauge Weight (including batteries): 5.5oz(156 grams)
Operating Temperature: 14 to 122°F (-10 to 50°C)
Packing List:
       Elcometer 456 Gauge
       Calibration Foils
       Wrist Harness
       Protective Case
       1 x screen protector
       USB Cable
       ElcoMaster™ 2.0 software
       2 x AA batteries
       Operating instructions

*Due to possible unforeseen changes and/or volatile markets, there may be a price or informational change on an item before we update it in our listings online. Should there be a price change on an item you have ordered, we will call you to advise you of the change prior to shipping.

Please fill out the form and we will be in touch shortly with your quote.

More Information

For the full list of Model T features, visit the Elcometer 456 Model "Product Sheet" page above.

Range: 0-60 mils

Includes:
Multiple calibration adjustment options
High/low limits
Full color screen with back light
Metric/Imperial Units
Statistics (# of readings, mean, highest /lowest readings, standard deviation, co-efficient of variation)
Impact, water & dust resistant-equivalent to IP64
Bluetooth to computer, pda or mobile phone
USB power supply option
Automatic rotating display; 0°, 90°, 180° & 270°
Individual batch calibrations sent to PC via ElcoMaster 2.0
Supplied with Test Certificate
Two year warranty if registered via www.elcometer.com

 

Similar to the Elcometer 550 Non-Contact Powder Thickness Gauge, this gauge includes a laser guide to help detect and keep consistent measuring distances. As a result, the number of readings and the speed at which they are completed are significantly increased.

By carefully controlling the thickness of powder applied to a product, you can minimize your powder usage and ensure the quality of your coating. As contact measurement solutions damage the finish and do not predict the cured coating thickness, measuring the powder thickness pre-cure requires a non-contact solution.

Using third generation proven airborne ultrasonic technology, the new Elcometer 550 accurately predicts cured coating thickness by non-contact measurement of coating powders.

  • Accurately predicts the cured coating thickness within ± 5% of the reading or ±0.25mils (±5µm)
  • Ergonomic gun designed for comfort when taking multiple readings
  • Hand held sensor allows easy positioning of the gun for fast measurement
  • Large illuminated colour display with positioning graph to guide orientation of sensor probe
  • Tough aluminium case, ideal for testing in an industrial environment

Easy to Use

  • Easy to read, large colour display
  • Adjustable screen brightness for all test conditions
  • Ergonomic probe - ideal for continuous testing
  • Can be used straight out of the box with minimal set up time
  • On-screen guidance graph and handle LEDs help you orientate the probe sensor for fast, accurate measurements.

Reliable

  • Fast, accurate and repeatable results
  • Can be used in accordance with ASTM D7378-Procedure C
  • Proven, 3rd Generation, airborne ultrasonic technology
  • User-programmable setup to account for varying powder shrinkage rates

Enhanced Technology

  • Measure thicknesses from 1.18 - 4.4mils (30 - 110µm)
  • 0.04 sq in (1mm²) measurement area - ideal for flat, curved and small surfaces
  • Test coatings on a wide range of substrates, including metal, wood, MDF, plastic and pre-coated surfaces
Ask An Expert
Help Desk
By clicking on this button, you agree to our terms of service.
Mandatory fields
CCIS