Ferrous IPC Thickness Gauge with Integral Probe for Shot of Grit Blasted Surfaces
Built in probe type: Ferrous
Reading Rate: 70+ readings per minute
Range: 0 - 1500μm (0 - 60mils)
Resolution:10μm / 1mil (where 5µm / 0.5 mil is rounded up)
Accuracy: ±5%
Minimum Thickness Substrate: 300μm (12mils)
Operating Temperature: -10 to 50°C (14 to 122°F)
Power Supply: 2 x AA dry cell batteries, rechargeable batteries can also be used
Battery Life: approximately 24 hours of continuous use a 1 readings per second**
Gauge Dimensions: 5.55"H x 2.87"w x 1.46"D (141 x 73 x 37mm)
Gauge Weight (including batteries): 5.5oz(156 grams)
Packing List:
Elcometer 456 IPC Gauge
1x Screen Protector
USB Cable
Wrist Harness
Protective Case
2 x AA batteries
Operating instructions
Please fill out the form and we will be in touch shortly with your quote.
Pre-calibrated with 4 profile ranges to ensure accurate coating thickness measurement on blasted substrates, the Elcometer 456 IPC Thickness Gauge is fast and very easy to use. The user selectable surface profiles include smooth, fine, medium and coarse ranges. The gauge’s built in integral ferrous probe allows thickness measurements to be taken on flat or curved surfaces, in mils or microns. Profile Metric Imperial With a reading rate of 70+ readings per minute, the gauge displays three individual thickness readings together with the average. ______________________________________________________________________________________________________________________________ Similar to the Elcometer 550 Non-Contact Powder Thickness Gauge, this gauge includes a laser guide to help detect and keep consistent measuring distances. As a result, the number of readings and the speed at which they are completed are significantly increased. By carefully controlling the thickness of powder applied to a product, you can minimize your powder usage and ensure the quality of your coating. As contact measurement solutions damage the finish and do not predict the cured coating thickness, measuring the powder thickness pre-cure requires a non-contact solution. Using third generation proven airborne ultrasonic technology, the new Elcometer 550 accurately predicts cured coating thickness by non-contact measurement of coating powders.
Easy to Use
Reliable
Enhanced Technology
|